Web UI > Workspace > Project > Project Dashboard

The Project Dashboard Tab provides detailed information about the Project and its available assets.

This view has separate sections for Project Status and Connectors Status, as well as detailed tables for the Producers, Aggregators and Consumers available for the selected project.

Project Status Section

This section provides general information about the status of the selected project.

Project Status Section

Project Status Buttons		The Stop, Reload and Start buttons can be used to Stop, Reload or Start a project.
	Stop	Unloads the Project from the Controller, stops all of its producers and aggregators and notifies all of its consumers that the project is has closed.
	Reload	Performs the Stop action followed by the Start action, but notifies consumers that they should reconnect. This action should be used to update the running version of a republished project, as it has the least impact on connected consumers.
	Start	Loads the latest published version of the project into the Controller and starts all of its baseline producers and aggregators.
Project Status		This can either be Active or Inactive
Published version		The published version of the selected project (the version automatically increments as changes are published)
Running version		The version of the selected project that is currently running. If the running version and the published version of the project are different, the icon will be present.
Totals
	Total Calls	The total number of Routine Calls served by the project
	Total Streams	The total number of Streams served by the project

If a project is Active, the Start button is disabled, the project can only be stopped or reloaded.

If a project is Inactive, the Stop and Reload buttons are disabled, the project can only be started.

Connectors Status Section

This section provides a real-time visual interpretation of the number of Active Calls, Active Streams, Total Calls and Total Streams registered on the active producers for each connector at any given time through a dedicated chart.

Each color-coded section of a chart represents a connector.

If you hover over a section of a chart a tool-tip will appear that contains the name of the connector followed by the number of Active Calls, Active Streams, Total Calls and Total Streams registered on all of its producers.

In the center of each chart you can find the total number of Active Calls, Active Streams, Total Calls or Total Streams registered on the active producers for all the connectors.

If no producers are yet available for the connectors or there aren't any active calls or streams , the total number will not be available and the number will be replaced with N/A.

The chart legend is interactive. Clicking on a Connector name will take you to its corresponding table in the Producers section.

Connectors Status Section

Topic Operations (Poll/Push) register as Calls, while Subscribed topics appear as Streams.

Producers Section

This section provides a real-time visual interpretation of each of the active producers from a project connector.

Each Connector has its own section (table) that contains information about its corresponding producers.

Producers Table

The Start Time, Active Calls, Active Streams, Total Calls and Total Streams table headings are interactive.

Click on them to sort the producers by your chosen criteria in ascending or descending order.

This section provides a real-time visual interpretation of the number of Active Calls, Active Streams, Total Calls and Total Streams registered on the active producers at any given time through a dedicated chart.

To activate the chart, click on any of the following table headings: Active Calls, Active Streams, Total Calls, Total Streams.

Each color-coded section of the chart represents an active producer, identified by its component ID.

If you hover over a section of a chart a tool-tip will appear that contains the component ID of the producer followed by the number of Active Calls, Active Streams, Total Calls and Total Streams registered on it.

In the center of each chart you can find the total number of Active Calls, Active Streams, Total Calls or Total Streams registered on the active producers for a specific connector. The totals are also available at the bottom of the table under their corresponding sections.

If no producers are yet available or there aren't any active calls or streams , the total number will not be available and the number will be replaced with N/A.

Connector	Displays the name of the connector
Component ID	Displays the Component ID of a producer. (color-coded to chart)
Start Time	Displays the exact time and date of when the producer was started
Session Name	Displays the session name of a producer
Active Calls	Displays the number of Active Calls for a specific producer
Active Streams	Displays the number of Active Streams for a specific producer
Total Calls	Displays the number of Total Calls for a specific producer
Total Streams	Displays the number of Total Streams for a specific producer
Status	Displays the status of a producer. This can either be Active, or Starting (if the producer has just been added).
Stop	Click on the Stop button to stop a specific producers. A manually stopped producer will not be replaced by the Controller.
Add New Producer	Click on the Add button to start a new producer for the Connector. A manually started producer will not be subject to automatic scale-downs by the Controller, but will be automatically replaced if it becomes unresponsive.

Aggregators section

This section provides a real-time visual interpretation of each of the active aggregators at any given time through a dedicated chart.

Aggregators Table

The Start Time, Active Calls, Active Streams, Total Calls and Total Streams table headings are interactive.

Click on them to sort the aggregators by your chosen criteria in ascending or descending order.

This section provides a real-time visual interpretation of the number of Active Calls, Active Streams, Total Calls and Total Streams registered on the active aggregators at any given time through a dedicated chart.

To activate the chart, click on any of the following table headings: Active Calls, Active Streams, Total Calls,Total Streams

Each color-coded section of the chart represents an active aggregator, identified by its component ID.

If you hover over a section of a chart a tool-tip will appear that contains the component ID of the aggregator followed by the number of Active Calls, Active Streams, Total Calls and Total Streams registered on it.

In the center of each chart you can find the total number of Active Calls, Active Streams, Total Calls or Total Streams registered on the active aggregators. The totals are also available at the bottom of the table under their corresponding sections.

If no aggregators are yet available or there aren't any active calls or streams , the total number will not be available and the number will be replaced with N/A.

Aggregators	Displays the name of the table
Component ID	Displays the Component ID of an aggregator. (color-coded to chart)
Start Time	Displays the exact time and date of when the aggregator was started
Session Name	Displays the session name of an aggregator
Active Calls	Displays the number of Active Calls for a specific aggregator
Active Streams	Displays the number of Active Streams for a specific aggregator
Total Calls	Displays the number of Total Calls for a specific aggregator
Total Streams	Displays the number of Total Streams for a specific aggregator

Consumers section

This section provides a real-time visual interpretation of each of the active consumers at any given time through a dedicated chart.

Consumers Table

The Start Time, Active Calls, Active Streams, Total Calls and Total Streams table headings are interactive.

Click on them to sort the consumers by your chosen criteria in ascending or descending order.

This section provides a real-time visual interpretation of the number of Active Calls, Active Streams, Total Calls and Total Streams registered on the active consumers at any given time through a dedicated chart.

To activate the chart, click on any of the following table headings: Active Calls, Active Streams, Total Calls,Total Streams

Each color-coded section of the chart represents an active consumer, identified by its component ID.

If you hover over a section of a chart a tool-tip will appear that contains the component ID of the consumer followed by the number of Active Calls, Active Streams, Total Calls and Total Streams registered on it.

In the center of each chart you can find the total number of Active Calls, Active Streams, Total Calls or Total Streams registered on the active consumers. The totals are also available at the bottom of the table under their corresponding sections.

If no consumers are yet available or there aren't any active calls or streams , the total number will not be available and the number will be replaced with N/A.

Consumers	Displays the name of the table
Component ID	Displays the Component ID of a consumer. (color-coded to chart)
Start Time	Displays the exact time and date of when the consumer was started
Session Name	Displays the session name of a consumer
Active Calls	Displays the number of Active Calls for a specific consumer
Active Streams	Displays the number of Active Streams for a specific consumer
Total Calls	Displays the number of Total Calls for a specific consumer
Total Streams	Displays the number of Total Streams for a specific consumer